Bombay Tools Center Bombay Pvt Ltd

The Cross Hatch Cutter is for assessing the resistance of paint coatings to separation from substrates when a right angled lattice pattern is cut into the coating, penetrating through to the substrate, it can also be viewed for adhesion between coating layers.There are two ways to assess performance, as a Pass/Fail test or graded as described, the respective National Standards stated listed below refers.Suitable for coatings applied onto flat surfaces and a thickness up to 250 microns.A high precision machined tip presenting 6 or 11cutting blades with various spacing is mounted ina handle. The test is carried out by performing one sets of (6 or 11 dependant on cutter selected)followed by another set of cuts at right angles to the first set.The obtained lattice is either brushed or cleared by applying and removing adhesive tape. The results are then classified with reference to standard scales.Result can be classified with reference to a standard

1 mm model-11 blades (Coating up to 60 micron)2 mm model-6 blades (Coating above 60 micron)3 mm model-6 blades (Coating 120 - 250 micron)Adhesive Tapes (ISO ASTM Certified)

Coating Thickness Gauge can non-destructively measure the thickness of non-conductive coatings on metal surfaces and non-ferromagnetic metal coatings on ferromagnetic metals (e.g. iron, nickel, cobalt, etc.), including measuring the thickness of iron, stainless steel surface paint or galvanized layer, measuring the thickness of aluminum, copper surface paint or plastic film.

PG1102 is with an external probe version; the gauge can be equipped with a variety of separated probes for easy replacement.

APPLICATION:

• Car paint thickness detection
• Ship manufacturing 
• Electroplating 
• Mental anti-rust treatment 
• Film thickness detection
• Metal parts processing

Elcotest Ford Cup Viscosity Measuring Cup

Simple flow cup of the efflux type is used for approximate measurements of apparent viscosity forcontrol of consistency during manufacture and use of paints, lacquers and viscous products. Flow cup with protective skirt are made from brass with stainless steelorifice and are equivalent to Type B cups. Each cup is supplied complete with a stand having leveling screws.

Available different standard IS 3944, IS 101,DIN 53211, ASTMD 1200.Supplied complete with stand equipped Level adjustment system with level indicator Available Sizes Cups B-2, B-3, B-4, B-5, B-6, B-7, B-8Calibration certificate optional.

We are suppliers of PENCIL HARDNESS TESTER, The Pencil Hardness tester is the most common but also the most inconsistent technique to measure the hardness of a coating. This test conduct scratch hardness tests to determine the resistance ofcoating material in order to prevent the scratcheson the surface. In the test, pencils of various degrees of hardness are moved over the surface under a fixed pressure and angle to the surface. The degree of hardness ofthe pencil which damages the surface is taken s a measurement of scratch hardness e.g. 3H hardness.Pencil Guide with imported Steadtler or UNI Mitsubishi Japanese 12/19 pencils Pencils 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H,4H, 5H, 6H, 7H, 8H, 9H.Complies with ASTDM 3363

Specifications:

• Rated Voltage: Manual
• Testing Load: 500 g
• Measuring Range: Pencil Hardness

Digital Portable Leeb Hardness Tester features lcd Display Of 128×64 Matrix With Back-light,showing All Functions And Parameters.converts To All Common Hardness Scales(hv,hb,hrc,hrb,hra,hs).english Display, Easy And Convenient Menuoperations.powerful Pc Software Available And Usb 1.0interface And Usb With Protective Membrane.7 Optional Impact Devices, Which Don't Requirere Calibration.memory Of 600 Group Data impact Times:32 1 .lower Limit Setting And Sound Alarm.material Of “cast Steel” Is Added; Hb Values Can Beread Out Directly When D/dc Impact Device Is Used Tomeasure “cast Steel” Work Piece.normal Aaa Battery And Big Power Store While Usbconnected And Charging Controlling Circuit.inbuilt Function Of Software Calibration.
Hardness Scale Hl, Hb, Hrb, Hrc, Hra, Hv, Hsmemory 48 600 Groups impact Times: 32 1 measuring Range Hld 170 960 see Below Table 1 And Table 2accuracy ±6hld (760±30hld) Error Of Displayed Value6hld (760±30hld) Repeatability Of Displayed Value standard Impact Device Doptional Impact Devices Dc/d+15/g/c/dlmax. Workpiece Hardness 996hv(for Impact Devices D/dc/dl/d+15/c)646hb(for Impact Device G)min. Radius Of Workpiece Rmin = 50mm (with Special Support Ring Rmin= 10mm)min. Workpiece Weight 2~5kg On Stable Support0.05~2kg With Compact Couplingmin. Workpiece Thickness 5mm (impact Devices D/dc/dl/d+15)1mm (impact Device C)10mm (impact Device G)min. Thickness Of Hardened Surface 0.8mmpower Normal Aa Battery continuous Working Time Approx. 100 H (back Light Off)operating Temperature 0~40???relative H Umidity ≤ 90%overall Dimensions 125*67*31mm (main Unit)weight 0.3kg (main Unit)
Main Unitimpact Device Type Dleeb Standard Test Block cleaning Brush supporting Ring communication Cable manualcarrying Cased atapro Software

Elcotest Digital Ultrasonic Thickness Gauge 
Measures Thickness Through Paint Coatings Multi Modal

ULTRASONIC THICKNESS GAUGE ADVANCE An intelligent gauge capable of measuring thickness through coating without the need to remove any paint/coating applied to the surface of the test piece. Based on the same operating principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy high as 0.1/0.01 millimeters. Themulti-mode feature of the gauge allows the user to toggle between pulse-echo mode(flaw and pit detection), and echo-echomode (eliminate paint or coating thickness).

Display: 4.5 digits LCD with EL backlight.Range: Pulse-Echo mode: (0.65???600)mm (in Steel).Echo-Echo mode: (3 30)mm for MT180Sound Velocity Range: (1000~9999) m/s.Resolution: 0.1mm/0.01mmAccuracy: ±(0.5%Thickness+0.01)mm, depends on materials and conditions Memory for up to 20 files (up to 99 values for each file) of stored values.Power Source:Two “AA” size, 1.5 Volt alkaline batteries. 100hours typical operating time (EL backlight off)communication: USB1.1.Outline dimensions:150mm×74mm×32 mm.Weight:245g

Multi-mode: Pulse-Echo mode and Echo-Echo mode.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites,epoxies, glass and other ultrasonic wave well-conductive materials.Transducer models are available for special application,including for coarse grain material and high temperature applications.Probe-Zero function, Sound-Velocity-Calibration function Two-Point Calibration function.Single point mode and Scan mode. Seven measurements readings per second in single point mode, and sixteen per second in Scan Mode.Coupling status indicator showing the coupling status.Units: Metric/Imperial unit selectable.Battery information indicates the rest capacity of the battery.Auto sleep and auto power off function to conserve batterylife.Optional software to process the memory data on the PC.

Standard Accessories :Main Body Probe P5EE (5MHz)Couplant Instrument Case Operating Manual Alkaline Battery (AA Size)

We are the leading Manufacturer, Wholesaler, Retailer and Exporter of Surface Profile Comparator Elcometer Grit & Shot.

Elcometer 125 Surface ComparatorsTechnical Specification

STANDARDS:
AS 3894.5, ASTM D 4417-A, IMO MSC.215(82), IMO MSC.244(83), ISO 8503-1, ISO 8503-2, SSPC PA 17

Equipment for determination of elongation and flexibility of paint applied to sheet metal. The frame has a bending lever with a roller which pivots on a steel conical mandrel with a diameter from 3.2 to 38.1mm (0.12 to 1.5"). A graduation indicates the mandrel diameter in mm and inches

Conical Mandrel Tester(Elcotest ). Conical Mandrel is used for determination of extensibility of painted Panels, which are clamped, is Position & Formed round the Conical Mandrel by rotating of the roller frame. The 200mm Mandrel tapers from 37mm to 6mm diameter which can be measured with the help of scale. After test the panels are examined to determine Minimum diameter at which failure by elongation occurs.

Specifications:

• Applications- Conical Mandrel is used for determination of extensibility of painted Panels, which are clamped, is Position & Formed round the Conical Mandrel by rotating of the roller frame.
• The 200mm Mandrel tapers from 37mm to 6mm diameter which can be measured with the help of scale.
• After test the panels are examined to determine Minimum diameter at which failure by elongation occurs.

ElcoTest Zahn cups can be used to quickly measure the viscosity of liquids such as paint, lacquer, varnish, syrup and oil. Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or lessThe viscosity Is measured by determining the amount of time it takes for a steady stream of sample to flow from the orifice in the bottom of the cup. This is converted to the viscosity in centistokes using an equation. Measurements should be made at 77 F (25 C).Fitted with handlesuitable for paints and inks, having different capillary orifice.Zahn Cup Viscometer No. 1, 2, 3, 4, 5

Specifications:

• Flow Cup Viscometer with stand (ford cup) b-4 made of brass
• Flow Cup Viscometer with stand (ford cup) b-2, b-3, b-5, b-6, b-7, b-8,· Spare cup for above
• Flow Cup Viscometer (ford cup) b-4, made of brass with certificate
• Zahn Viscometer cup no.1, 2, 3, 4 & 5 with handle